Is it possible to send MIDI signals to another program frm VVVV? I attempted to do this from MidiShortOutput, but can’t select the channel from which to send.
Help is appreciated :-) Thanks!
Is it possible to send MIDI signals to another program frm VVVV? I attempted to do this from MidiShortOutput, but can’t select the channel from which to send.
Help is appreciated :-) Thanks!
short output, short answer:
4 bits of the MESSAGEbyte are carrying the channel information.
more about this:
http://www.midi.org/about-midi/table1.shtml
perhaps later a bit more…
ah yes, modules to send some notes are still at my disk, maybe i can upload this evening …
tonfilm, that would be great. thanks so much :-)
hi,
i used MidiControllerOut(Devices).v4p once (by the way a nice patch, that saved me a lot of time, tonfilm?!). i encountered some strange problems with sending midi out. the MidiShortOutput node did not work when starting the patch, until i once sent a message to channel 128. so, if you have problems, bang it on loading to send a message to channel 128.
good luck,
michel.
i am on it … please be patient, i have to change the module a little …
hi tonfilm, I’m trying to send midi note values to reaktor but don’t get it running. would be nice if you could send me your module.
thanks m9d
I have succesfully sent midi, using midi yoke to create virtual midiinterfaces that work between programmes.
works like a charm between ableton and vvvv,. just be careful about not generating midi feedback
Sune
exuming an old topic about midi…
i’m using an echoplex(external Loop hardware generating Midiclock) to synchro slave live (via MidiClock)
when the first loop is done on the echoplex…
i get the “played” tempo value with MidiCLock (Devices)
and some divide operation …
the idea is first to get an estimation of
the played tempo (first 8 or 16 bars) with a +/-3 bpm precision
cause of the tempo fluctuation…
and then switch to a fixed tempo value
but the problem as explained in the attached link
is to bang the DoSend pin of the MidiShortOut at the good rate
and to send the 248/249/254 and 255 decimal value in the good order???)
for the speed i’ve try LFO scaled …
but nothing seems to be fast enought or precise enought…to bang the MidiShortOut and get a good tempo
the cpu frequency also seems to interact with the midiclock “rate”