Club3D MST DP1.2 Hub

Hi
share your experience about the MST Hub, it s cheap!

Compatible hardaware, max resolutions, configuration, multi heads and whatnot.

http://www.club-3d.com/index.php/products/reader.en/product/mst-hub-1-3.html

Are the outputs synced?

@katzenfresser: any experience in comparison to tripleHead2go?
TripleHead2go and these MST hubs do similar things but work in a completely different way.

  • A TripleHeadToGo for the system always is one big Display and the split into 2 or 3 parts is done inside the TripleHead. All segments always have the same resolution and frame rate.
  • The 2 or 3 monitors connected to a MST hub will show up as 2 or 3 seperate Displays and can have different resolution and frame rate. If the connected monitors have the same resolution you can combine them to a EyefinityGroup (on AMD-Cards of course / have not tested the MST hub with nvidia)

If you have a amd-card with for example 1xDP, 1xHDMI, 2xDVI and you connect one MST hub the combo will “feel like” one card with 3xDP, 1xHDMI, 2xDVI.
If you have a card with 2x DP you can connect 1 MST hubs and get 6 individual displays that you can combine to one big EyefinityGroup.
BUT: You can not (or at least i was not able to) enable more then 6 displays at once in the CatalystControlCenter … so connecting more than 2 MST hubs to one graphics card does not make any sense.

@bjoern:
Have not tested this, but i geuss they are NOT synced.

… these are my experiences from a first brief test some months ago … tested with Asus EAH6970 DCII and AMD FirePro W7000 … of course things might be slightly different with other cards, newer drivers …

hi all, still few questions:
goggle says there no chance to get span mode with Nvidia? right?
so eyefinity only:
I still able to connect matrox TH2G to MST hub?
what is max. configuration for matrox?
Do MST hubs handle EDID?
Some users report not reliable signal (mostly surface pro). What is the PC praxis?
You can not (or at least i was not able to) enable more then 6 displays at once in the CatalystControlCenter … so connecting more than 2 MST hubs to one graphics card does not make any sense.
but if AMD card has 2xDP + 1x HDMI > 2 MST hubs making 6 displays as span + 1 patching monitor on HDMI would work?

thanks,
dimi

you can get “span mode” with nvidia, they just call it surround. http://www.geforce.com/hardware/technology/surround

(MST hub) Isn’t supported by NVIDIA for Surround. Will work as independent displays. The ball is in NVIDIA’s court to update their display driver.:
http://www.wsgf.org/article/review-club-3d-mst-hub

Is it still up-to-date?

NVIDIA Sourround isn’t working for MST hub (tested today).

Well… someone asked for support back in 2013 already…

https://forums.geforce.com/default/topic/638400/?comment=4502759

why do you need span mode? with recent versions, it is more or less just as easy to use multiple renderers?

somebody who can tell me why KINECT with MAXMSP don’t output digital signal ? it still out put message ?

No idea zhangruiyuya SORRY

maybe try here https://cycling74.com/forums/

:)