» how to make a FTIR multitouch surface
This site relies heavily on Javascript. You should enable it if you want the full experience. Learn more.

how to make a FTIR multitouch surface

French | Russian

How to make a FTIR multitouch table

This is an experiment based on “frustrated total internal reflection” aka FTIR.

This is a very basic demo and we did it just to see how it work and it took us just 4 days!

The most difficult part is seting-up the hardware, in the following list you can see what we used:

  • 1 panel of plexiglass 8mm thickness
  • 2 strips of IR LEDs (18 LED per strip)
  • 2 sheets of tracing paper
  • 1 projector
  • 1 mirror
  • 1 analog camera sensitive to IR light
  • 1 IR filter for the camera
  • 1 computer

in this video you can see how it work what i did.

here you can see some photos of the setup

 

the two LED strips its must be placed on the edges of the plexiglass panel (more strips and more LEDs is, of course, better).

here you can see what happen inside the panel when you touch it (FTIR) :

 

Image credit Jeff Huan
http://www.cs.nyu.edu/~jhan/ftirsense/ftirschematic.gif

When you are done with this part most of the work is done!

Place the camera underneath the table, the camera must be IR sensible (almost all digital cameras, including webcams, are but they are usually fitted with an IR filter that cuts all the IR light. We must open the camera and remove it!).

Put a visible light filter in front of the camera (one of the best is just the black tail end of developed slide films).

Put the projector underneath the table with a mirror reflecting the image on the projection surface. This is needed just to be able to place the projector in a comfortable horizontal position and to gain a bit of image size.

ok have you done it?

connect all to the computer and vvvvenjoy...

anonymous user login

Shoutbox

~14d ago

~17d ago

joreg: The Winter Season of vvvv workshops is now over but all recordings are still available for purchase: https://thenodeinstitute.org/ws23-vvvv-intermediates/

~24d ago

schlonzo: Love the new drag and drop functionality for links in latest previews!

~1mth ago

joreg: Workshop on 29 02: Create Sequencers and Precise Clock Based Tools. Signup here: https://thenodeinstitute.org/courses/ws23-vvvv-08-create-sequencers-and-precise-clock-based-tools-in-vvvv-gamma/

~1mth ago

joreg: Workshop on 22 02: Unlocking Shader Artistry: A Journey through ‘The Book of Shaders’ with FUSE. Signup here: https://thenodeinstitute.org/courses/ws23-vvvv-12-book-of-shaders/

~2mth ago

joreg: Talk and Workshop on February 15 & 16 in Frankfurt: https://visualprogramming.net/blog/vvvv-at-node-code-frankfurt/

~2mth ago

woei: @Joanie_AntiVJ: think so, looks doable